A Scroll wheel building block performs a scroll action on screen in a specific position.
If no position is specified, the position of the last mouse action performed by LEAPTEST is used.
Fully expanded, the Scroll wheel block shows the following properties:
The Block Header (“Scroll wheel”)
The green input connector in the header is used to trigger the block to start executing.
The green output connector in the header triggers when the scroll has been performed.
The title of the block (“Scroll wheel”) can be changed by double-clicking on it and typing in a new title.
Specify the screen position to perform the scroll wheel action using X, Y coordinates. The top-left corner of the screen is position 0, 0.
As mentioned above, note that if this position is not set and no other mouse action has been performed by LEAPTEST, scrolling will happen at the screen coordinates 0,0.
Click the expander button to work with the X and Y coordinates separately.
The amount of scrolling that will be performed.
The delay in seconds between each of the scrolls.
Await no movement
Delay the scroll wheel action until there has been no movement on the screen for a specific period of time — for instance 2 seconds.
This is useful when waiting for a screen update to occur, for instance a page loading in a browser window. Regardless of this checkbox, the scroll wheel action will occur after waiting a maximum of 30 seconds.
The number of seconds the screen must have seen no movement before proceeding.Updated January 5th 2017.